Xerox Phaser 5335 User Manual

10 1 Printer Environment Settings
1.4 Enabling Ports
Set all ports you want to use to [Enable] on the control panel.
Use the following procedure to enable each port.
The following procedure uses IPP as an example.
1. Press the <Menu> button on the control panel to display the menu screen.
2. Press the < > button until [Admin Menu] is displayed.
3. Press the < > button to accept the selection.
[Network/Port] is displayed.
4. Press the < > button to accept the selection.
[Parallel] is displayed.
5. Press the < > button until the desired protocol is displayed. (Example: IPP).
6. Press the < > button to select the protocol.
[Port Status] is displayed.
7. Press the < > button to accept the selection.
The current setting is displayed.
Menu
Print Language
Menu
Admin Menu
Admin Menu
Network / Port
Network / Port
Parallel
Network / Port
IPP
IPP
Port Status
Port Status
Disable*

Xerox Phaser 5335 Specifications

General

Brand	Xerox
Model	Phaser 5335
Category	Printer
Language	English