To Next Page

To Previous Page

5.1 Overview of the Common Menus 75

Changing the Settings

Basic Procedure

To display a menu screen or to move up and down the menus, use the following buttons on

the control panel.

Note

• Once you save a value by pressing the

<OK/Eject> button, an asterisk "*" appears next to the

value. To change the value, return to the initial screen and repeat the preceding steps.

• If the menu screen is left idle for 3 minutes, the display returns to the print screen. Any incomplete

setting on the menu screen made 3 minutes before becomes invalid.

Resetting a Value to Its Default

To reset a value to its default, display the value and press the < > and < > buttons

simultaneously. The value changes to its factory setting. To accept the value, press the

<OK/Eject> button.

Ready to print Menu

Print Language

Admin Menu

Network / Port

Port Status

Enable

Port Status

Enable

(print screen) (menu screen)

Press to display the menu items in the same hierarchy

Press to display the menu screen

< >: Press to display a lower hierarchy

< >: Press to display a higher hierarchy

" appears next to the

option selected)

Press to accept

the selection

Press to close the menu screen

<Menu>

< >

(option selection screen)

Xerox Phaser 5335 User Manual

Other manuals for Xerox Phaser 5335