Xerox Phaser 6180MFP User Manual

Scanning to a Computer on a Network
Phaser® 6180MFP Multifunction Printer
7-9
For Macintosh:
1. Open the Applications folder, and then select Xerox/Phaser6180MFP/Address Book
Editor.
2. In the left-hand pane of the Address Book Editor, double-click the Server icon, and then
select New.
The Server Address dialog box opens.
3. In the Name field of the Server Address dialog box, enter the name that you want this
address to appear under in the Address Book.
4. On the File menu, select Programs > Xerox > Phaser 6180MFP >Address Book Editor.
5. In the left-hand pane, right-click the Server icon, and then select New.
The Server Address dialog box appears.
6. Click the Computer (SMB) option button.
7. Type your IP address in the Server Name / IP Address field.
8. Type your short name in Share Name field.
9. Type the name and password that you login with in the Login fields.
10. Type your password in the Confirm Login Password field.
11. If you are using the default port number, select the Use Default Port Number check box.
If you are not using the default port number, type the port number in the Port Number
field.
12. Confirm the settings, and then click OK.
13. On the File menu, select Save.
The Address Book is saved with the new entry for your computer.
You are now ready to scan images to the network computer.

Xerox Phaser 6180MFP Specifications

General

Brand	Xerox
Model	Phaser 6180MFP
Category	All in One Printer
Language	English