Maintenance
180 Xerox
®
VersaLink
®
B405 Multifunction Printer
User Guide
3. Remove the paper from the paper tray.
4. Keep the paper wrapped and away from humidity and dirt.
5. Lift and carry the printer as shown in the illustration.
Notes:
• When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting the printer
more than 10 degrees can cause toner spillage.
• When moving the printer over a long distance, remove the drum cartridge and toner cartridge
to prevent toner from spilling.
CAUTION: Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The
Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover damage to
the printer caused by improper moving.
After moving the printer:
1. Reinstall any parts that you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and power on the printer.
To Next Page
Loading...
Need help?
General
