VR-160 OPERATING MANUAL 67
AUTOMAT IC POWER-ON FEATURE
The VR-160 also includes the capability to turn itself on after a programmed time interval.
1. Press and hold in the
[
BANK
]
key for one second to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 36: ON TIMER.
Note: Do not forget to pull the DIAL knob to rotate the DIAL
knob.
3. Press the
[
BANK
]
key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to set the desired time after which the
radio will automatically turn on. Note: that is not the time of day
when the radio will turn on; it is the number of hours and min-
utes until the radio turns on. The available selections are 10 min-
utes - 24 hours (10 minute/step).
5. When you have made your selection, press and hold in the
[
BANK
]
key for one second to save the new setting and exit to
normal operation.
When the radio is turned off, this activates the Automatic Power-On
feature; a countdown timer in the display will show the time remaining until automatic
switch-on.
You may cancel the Automatic Power-On feature (turn off the radio), by pressing and holding
the POWER switch for one second while the Automatic Power-On feature is engaged.
The Automatic Power-On feature will be ignored if the Wakeup feature is activated.
MISCELLANEOUS SETTING
To Next Page
Loading...
Need help?
General
