VR-160 OPERATING MANUAL94
RESET PROCEDURES
In some instances of erratic or unpredictable operation, the cause may be corruption of
data in the microprocessor (due to static electricity, etc.). If this happens, resetting of the
microprocessor may restore normal operation. Note that all memories will be erased if you
do a complete microprocessor reset, as described below.
1. Turn the radio off.
2. Press and hold in the
[
MODE
]
and
[
V/M
]
keys while turning the radio on.
3. Press the
[
F/W
]
key momentarily to reset all settings to their factory defaults (press
any other key to cancel the Reset procedure).
To Next Page
Need help?
General
