8-47
Lower unit (counter rotation model, L-transom model)
Removing the lower unit
1. Drain the gear oil.
2. Remove the propeller, trim tab, and lower
unit. See steps 2–7 in “Removing the
lower unit” (8-3).
TIP:
When disassembling the lower unit, measure
the backlash before disassembly. See “Mea-
suring the forward gear backlash and reverse
gear backlash before disassembly” (8-69).
Disassembling the propeller (SDS
propeller)
See “Assembling the propeller (SDS propel-
ler)” (8-4).
Checking the propeller
See “Checking the propeller” (8-3).
Checking the lower unit anode
See “Checking the lower unit anode” (8-3).
Assembling the propeller (SDS
propeller)
See “Assembling the propeller (SDS propel-
ler)” (8-4).
To Next Page
Loading...
Need help?
General
