Yamaha Morphous CP250W User Manual

INSTRUMENT AND CONTROL FUNCTIONS
Main switch/steering lock
EAU10460
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
EAU36070
ON
All electrical circuits are supplied with
power; the meter lighting, taillight, li-
cense plate light and position lights
come on, and the engine can be start-
ed. The key cannot be removed.
NOTE:.
sidestand is moved down.
be switched off, which may result in
loss of control or an accident. Make
The headlights come on automatically
when the engine is started and stay on
until the key is turned to “OFF” or the
EAU10660
OFF
All electrical systems are off. The key
can be removed.
EAU10680
LOCK
The steering is locked, and all electrical
systems are off. The key can be re-
moved.
To lock the steering
1. Turn the handlebars all the way to
the left.
2. Push the key in from the “OFF” po-
sition, and then turn it to “LOCK”
while still pushing it.
3. Remove the key.
To unlock the steering
Push the key in, and then turn it to
“OFF” while still pushing it.
EWA10060
sure that the vehicle is stopped be-
fore turning the key to “OFF” or
“LOCK”.
3
A WARNING
Never turn the key to “OFF” or
“LOCK” while the vehicle is moving,
otherwise the electrical systems will
3-1

Yamaha Morphous CP250W Specifications

General

Brand	Yamaha
Model	Morphous CP250W
Category	Scooter
Language	English