Yamaha Morphous CP250W User Manual

SCOOTER CARE AND STORAGE
what products to use.
7
Storage
EAU36560
fuel from deteriorating.
3. Perform the following steps to pro-
Short-term
Always store your scooter in a cool, dry
place and, if necessary, protect it
against dust with a porous cover.
CAUTION:
ECA10820
• Storing the scooter in a poorly
ventilated room or covering it
with a tarp, while it is still wet,
will allow water and humidity to
seep in and cause rust.
• To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia)
and areas where strong chemi-
cals are stored.
tect the cylinder, piston rings, etc.
from corrosion.
a. Remove the spark plug cap
and spark plug.
b. Pour a teaspoonful of engine oil
into the spark plug bore.
c. Install the spark plug cap onto
Long-term
Before storing your scooter for several
months:
1. Follow all the instructions in the
“Care” section of this chapter.
2. Fill up the fuel tank and add fuel
stabilizer (if available) to prevent
the fuel tank from rusting and the
the spark plug, and then place
the spark plug on the cylinder
head so that the electrodes are
grounded. (This will limit spark-
ing during the next step.)
d. Turn the engine over several
times with the starter. (This will
coat the cylinder wall with oil.)
e. Remove the spark plug cap
from the spark plug, and then
install the spark plug and the
spark plug cap.
EWA10950
A WARNING
To prevent damage or injury from
sparking, make sure to ground the
spark plug electrodes while turning
the engine over.
4. Lubricate all control cables and the
7-3

Yamaha Morphous CP250W Specifications

General

Brand	Yamaha
Model	Morphous CP250W
Category	Scooter
Language	English

Summary

Safety Information and Riding Guidelines

Safe Riding Practices

Essential advice for safe operation, including pre-ride checks, visibility, and hazard avoidance.

Protective Apparel and Loading Guidelines

Guidelines on essential protective gear and warnings for vehicle modifications, loading, and accessories.

Location of Important Labels

Identifies and explains the location and meaning of critical safety and information labels on the vehicle.

Instrument and Control Functions

Main Switch, Locks, and Indicators

Multi-function Display and Handlebar Controls

Brake System Operation

Pre-Operation Checks

Pre-Operation Checklist

A comprehensive list of checks to perform before each ride to ensure vehicle safety and readiness.

Operation and Important Riding Points

Starting the Engine and Riding Basics

Step-by-step instructions for starting the engine and beginning to ride safely.

Speed Control and Braking

Guidance on acceleration, deceleration, braking, and engine break-in procedures.

Parking Procedures

Periodic Maintenance and Minor Repair

Maintenance Schedules and Tool Kit

Fluid and Filter Service

Brake System, Tires, and Wheels Maintenance

Maintenance for tires, wheels, and the brake system, including fluid and pad checks.

Battery, Fuses, and Lighting System

Troubleshooting and Engine Overheating

Scooter Care and Storage