Yamaha Morphous CP250W User Manual

INSTRUMENT AND CONTROL FUNCTIONS
EAU38140
3
Helmet holder
The helmet holder is located on the bot-
tom of the seat. A helmet holding cable
is provided under the seat to secure a
helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 3-10.)
2. Pass one end of the helmet hold-
ing cable through the buckle on the
helmet strap, and then hook both
ends of the helmet holding cable
over the helmet holder as shown.
EWA10160
1. Helmet holding cable
2. Helmet holder
3. Securely close the seat.
A WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
Storage compartments
EAU38131
Storage compartment A
To open the storage compartment
when it is locked, insert the key in the
lock, turn it counterclockwise, and then
To release the helmet from the hel-
met holder
Open the seat, remove the helmet
holding cable from the helmet holder
and the helmet, and then close the
seat.
slide the opening lever up.
To open the storage compartment
when it is unlocked, simply slide the
opening lever up.
1. Unlock.
2. Opening lever
3. Lid
To lock the storage compartment, push
the lid into the original position, insert
the key in the lock, turn it clockwise,
and then remove it.
3-12

Yamaha Morphous CP250W Specifications

General

Brand	Yamaha
Model	Morphous CP250W
Category	Scooter
Language	English