Yamaha Morphous CP250W User Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
Handlebar switches
Left
EAU12345
Right
1. Dimmer switch “ID/SD”
2. Turn signal switch “^i/cj>”
3. Horn switch “ L^ ”
1. Engine stop switch “(~)/B3”
2. Start switch “(2\”
EAU12400
Dimmer switch “ IO/SO ”
Set this switch to “ID” for the high
beam and to “ID ” for the low beam.
EAU12460
Turn signal switch “<?/<$>”
To signal a right-hand turn, push this
switch to “>=>”. To signal a left-hand
turn, push this switch to “<=”. When re-
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU12500
Horn switch “ K?- ”
Press this switch to sound the horn.
EAU12660
Engine stop switch “O/^”
Set this switch to “O” before starting
the engine. Set this switch to “$3” to
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
EAU12720
Start switch “(g)”
With the sidestand up, push this switch
while applying the front or rear brake to
crank the engine with the starter.
CAUTION:
ECA10050
See page 5-1 for starting instruc-
tions prior to starting the engine.
3-6

Yamaha Morphous CP250W Specifications

General

Brand	Yamaha
Model	Morphous CP250W
Category	Scooter
Language	English