PSR-A3000 Owner’s Manual 207
Other Functions
11
SETUP FILES
For the items below, you can save your original settings to USER or USB drive as a single file for future recall.
1 Make all desired settings on the instrument.
2 Call up the operation display.
3 Use the [F]–[I] buttons to call up the relevant display for saving your data.
4 Use the TAB [E][F] buttons to select one of the tabs (USER or USB) to which your
settings will be saved.
5 Press the [6 ] (SAVE) button to save your file.
6 To recall your file, press the desired [F]–[I] button in the SETUP FILES display, then
select the desired file.
If you want to call up the factory default files, select the file in the PRESET tab.
When the file is selected, a message is displayed according to the content of the file. Press the desired button.
[F] SYSTEM
SETUP FILES
Parameters set on the various displays such as the [FUNCTION] TAB
[E] MENU 1 [J] UTILITY are handled as a single System Setup file.
Refer to the “Parameter Chart” in the Data List on the website for details on
which parameters belong to System Setup.
[G] MIDI SETUP
FILES
The MIDI settings including the MIDI Setups on the USER tab display are
handled as a single file.
[H] USER EFFECT
FILES
The following data can be managed as a single file.
• User Effect types .......................................................................... page 186
• User Master EQ types ................................................................. page 188
• User Master Compressor types .................................................... page 189
[I] MUSIC FINDER
FILES
All the preset and created Records of the Music Finder are handled as a sin-
gle file.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
