Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
128
Mute a Call
To mute a call:
1. Press during an active call.
The LCD screen indicates that the call is now muted.
To un-mute a call:
1. Press again to un-mute the call.
Mute While Dialing
To mute the microphone while dialing:
1. Press on the pre-dialing, dialing or calling screen.
The call is muted automatically when setting up successfully.
To un-mute the microphone while dialing:
1. Press again on the pre-dialing, dialing or calling screen.
Note
Keep Mute
If keep mute is enabled, you can mute the microphone on any screen. The phone stays in the
mute state until you un-mute the microphone or until the phone restarts. This feature should be
pre-configured by your system administrator.
You can also mute the microphone when the IP phone is ringing.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm