Yealink SIP-T29G User Manual

Advanced Phone Features
169
7. Click Confirm to accept the change.
Note
According to the response message from the server, the IP phone will automatically configure
the BLF List keys beginning from the first unused DSS key (The default order of BLF list keys
assigned automatically is Line Key->Ext Key). Once any DSS key is seized, the IP phone will skip
to configure the next DSS key.
You can receive a visual or/and an audio alert (if enabled) on your phone when the monitored
user receives an incoming call. For more information, refer to Configuring Visual and Audio Alert
for BLF pickup on page 162.
Note
Call Recording
The SIP-T29G IP phone supports local and server recording. If you insert a USB flash drive into
the USB port on your phone, you can record active calls on IP phone. The recordings are saved
as *.wav files on your USB flash drive. You can also record active calls by pressing a record key
on the phone. The recordings are saved on the server.
Note
For more information on BLF List URI/BLF List Pickup Code/BLF List Barge In Code/BLF List
Retrieve Call Parked Code, contact your system administrator.
The pickup code is used in the following order of preference:
BLF List Pickup Code (Account->Advanced)>Directed Call Pickup Code (Account->Advanced)>
Directed Call Pickup Code (Features->Call Pickup). If all of them are not configured, pressing the
BLF List key will directly call the monitored user when he/she receives an incoming call. For more
information on pickup code, refer to Call Pickup on page 154.
Before recording any call, especially those involving PSTN, it is necessary to know about the rules
and restrictions of any governing call-recording in the place you are in. It is also very important to
have the consent of the person you are calling before recording the conversation.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm