Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
154
- If the call park code is not configured, you need to enter the call park code (e.g., *01).
Press , or the Park soft key. The call will be transferred to the shared
parking lot.
- If the call park code is configured, the call will be directly transferred to the shared
parking lot.
Note
To retrieve a parked call in Transfer mode:
1. Do one of the following:
- If the park retrieve code is not configured, dial the park retrieve code (e.g., *11).
- If the park retrieve code is configured, press the Retrieve soft key on the dialing
screen or retrieve key (if configured) on the IP phone.
The phone will retrieve the parked call from the shared parking lot.
Call Pickup
You can use call pickup to answer someone else’s incoming call on your phone. The SIP-T29G IP
phone supports directed call pickup and group call pickup. Directed call pickup is used for
picking up a call that is ringing at a target phone number. Group call pickup is used for picking
For some servers, the system will return a specific call park retrieve number (park retrieve code)
from which the call can be retrieved after parking successfully.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm