Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
86
2. Select Enabled from the pull-down list of Dual Headset.
3. Click Confirm to accept the change.
Note
Bluetooth Headset
The SIP-T29G IP phone supports Bluetooth. Bluetooth enables low-bandwidth wireless
connections within a range of 10 meters (32 feet). The best performance is in the 1 to 2 meter (3
to 6 feet) range.
You can activate/deactivate the Bluetooth mode on the phone, and then pair and connect the
Bluetooth headset with your phone. You can pair up to 30 Bluetooth headsets with your phone.
However, only one headset can be connected at a time. You can also disconnect and delete your
Bluetooth headset from the phone.
Note
Dual headset is configurable via web user interface only.
Ensure that the Bluetooth USB dongle is properly connected to the USB port at the back of the IP
phone. For more information, refer to Phone Installation on page 20.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm