Yealink SIP-T30P Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
159
Default
0
Supported
Devices
All phones except CP920
Parameter
voice.headset_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the headset.
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.
Permitted
Values
Integer from -50 to 50
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > Audio > Headset Send Volume (-50~50)
Parameter
voice.headset.autoreset_spk_vol <y0000000000xx>.cfg
Description
It configures the headset's volume level during a call.
Permitted
Values
0-The headset volume at the end of a call persists between calls.
1 to 15-The headset volume does not persist between calls, and resets to this specified level each
new call.
Default
0
Supported
Devices
All phones except CP920
Parameter
voice.side_tone
[1]
<y0000000000xx>.cfg
Description
It configures the volume of the sidetone.
Permitted
Values
Integer from -100 to 0
Default
-25
Parameter
voice.handset.tia4965.enable <y0000000000xx>.cfg
Description
It enables or disables the handset's volume level to be reset to level 11 after the call if the volume
level for the current call exceeds the standards.
Note: The value configured by the parameter “voice.handset.autoreset_spk_vol” takes precedence
over that configured by this parameter.
Permitted
Values
0-Disabled
1-Enabled, if the handset's volume level for the current call is adjusted to level 12/13/14/15, the
volume level automatically resets to 11 after the call. That is, the initial volume level is 11 for the next
call.
Default
1
Supported
Devices
All phones except T48G, T46G, T42G, T41P, T29G and CP920
Parameter
voice.headset.tia4965.enable <y0000000000xx>.cfg
Description
It enables or disables the headset's volume level to be reset to level 11 after the call if the volume
level for the current call exceeds the standards.
Note: The value configured by the parameter “voice.headset.autoreset_spk_vol” takes precedence

Yealink SIP-T30P Specifications

General

Brand	Yealink
Model	SIP-T30P
Category	IP Phone
Language	English