EasyManuals Logo
Home>Yealink>IP Phone>SIP-T30P

Yealink SIP-T30P Administrator's Guide

Yealink SIP-T30P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
Network Configurations
45
Default
1
Supported
Devices
T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G, T27G
[1]
If you change this parameter, the phone will reboot to make the change take effect.
[2]
X is Wi-Fi ID. X=1-5.
Wireless Network IP Addressing Mode Configuration
The following table lists the parameters you can use to configure IP addressing mode for the wireless network.
Parameter
static.network.wifi.ip_address_mode
[1]
<y0000000000xx>.cfg
Description
It configures the IP addressing mode for the wireless network.
Permitted
Values
0-IPv4
1-IPv6
2-IPv4 & IPv6
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
Network > Wi-Fi > Internet Port > Mode (IPv4/IPv6)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > IP Mode
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > IP Mode
Parameter
static.network.wifi.preference
[1]
<y0000000000xx>.cfg
Description
It specifies IPv4 or IPv6 as the preferred wireless network in a Dual-Stack mode.
Note: It works only if “static.network.wifi.ip_address_mode” is set to 2 (IPv4 & IPv6).
Permitted
Values
0-IPv6
1-IPv4
Default
0
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920
Web UI
Network > Wi-Fi > Internet Port > Preference(IPv4/IPv6)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > Preference
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > Preference
[1]
If you change this parameter, the phone will reboot to make the change take effect.
IPv4 Wireless Network Configuration
The following table lists the parameters you can use to configure IPv4 wireless network.
Parameter
static.network.wifi.internet_port.type
[1]
<y0000000000xx>.cfg

Table of Contents

Other manuals for Yealink SIP-T30P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T30P and is the answer not in the manual?

Yealink SIP-T30P Specifications

General IconGeneral
BrandYealink
ModelSIP-T30P
CategoryIP Phone
LanguageEnglish

Related product manuals