EasyManuals Logo
Home>Yealink>IP Phone>SIP-T30P

Yealink SIP-T30P Administrator's Guide

Yealink SIP-T30P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #463 background imageLoading...
Page #463 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
459
SCA Configuration
The following table lists the parameters you can use to configure SCA.
Parameter
account.X.shared_line
[1]
<MAC>.cfg
Description
It configures the registration line type.
Permitted
Values
0-Disabled
1-Shared Call Appearance
Default
0
Web UI
Account > Advanced > Shared Line
Parameter
account.X.line_seize.expires
[1]
<MAC>.cfg
Description
It configures the line-seize subscription expiration time (in seconds).
Note: It works only if “account.X.shared_line is set to 1 (Shared Call Appearance).
Permitted
Values
Integer from 0 to 65535
Default
15
Parameter
account.X.shared_line_callpull_code
[1]
<MAC>.cfg
Description
It configures the call pull feature access code to retrieve an existing call from another shared phone
that is in an active or public hold status.
Note: It works only if “account.X.shared_line is set to 1 (Shared Call Appearance).
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Web UI
Account > Advanced > Call Pull Feature Access Code
Parameter
features.barge_in_via_username.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to use the user name of the account to barge in an active call.
Permitted
Values
0-Disabled, user register name to barge in, the phone sends INVITE request with the register name
when barging in a call
1-Enabled, the phone sends INVITE request with the user name when barging in a call
Default
0
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
phone_setting.call_remote_end_when_hold.busy_tone.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to play a busy tone when a public hold call on the shared line is
retrieved by the remote party.
Note: It works only if "features.busy_tone_delay" is not set to 0.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
T57W, T54W, T53W, T53, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G, T31P,

Table of Contents

Other manuals for Yealink SIP-T30P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T30P and is the answer not in the manual?

Yealink SIP-T30P Specifications

General IconGeneral
BrandYealink
ModelSIP-T30P
CategoryIP Phone
LanguageEnglish

Related product manuals