EasyManuals Logo
Home>Yealink>IP Phone>SIP-T30P

Yealink SIP-T30P Administrator's Guide

Yealink SIP-T30P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #178 background imageLoading...
Page #178 background image
Audio Features
174
Note: It works only if “features.headset_mode.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled, the headset mode will be deactivated after the call, if you switch the headset mode to
speakerphone/handset mode.
1-Enabled, the headset mode will not be deactivated after the call, even if you switch the headset
mode to speakerphone/handset mode.
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > General Information > Headset Prior
Parameter
features.headset.ctrl_call.enable <y0000000000xx>.cfg
Description
It enables or disables the user to initiate or end a call by pressing the HEADSET key.
Note: It works only if “features.headset_mode.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except CP920
Dual Headset
The dual headset allows you to use two headsets on one IP phone. To use this feature, you need to physically con-
nect two headsets to the headset and handset jacks respectively. Once the IP phone connects to a call, the headset
connected to the headset jack has the full-duplex capability, with the headset connected to the handset jack is only
used for listening.
Note: The dual headset is not applicable to the Bluetooth headset and USB headset. It is not applicable to CP920 phones.
Topic
Dual Headset Configuration
Dual Headset Configuration
The following table lists the parameter you can use to configure dual headset.
Parameter
features.headset_training <y0000000000xx>.cfg
Description
It enables or disables the dual headset feature.
Note: It works only if “features.headset_mode.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, users can use two headsets on one phone. When the IP phone joins a call, the headset
connected to the headset jack has the full-duplex capability, with the headset connected to the hand-
set jack is only used for listening.
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > General Information > Dual Headset

Table of Contents

Other manuals for Yealink SIP-T30P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T30P and is the answer not in the manual?

Yealink SIP-T30P Specifications

General IconGeneral
BrandYealink
ModelSIP-T30P
CategoryIP Phone
LanguageEnglish

Related product manuals