Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
269
Ext Keys Configuration
Ext Keys Configuration
The following table lists the parameters you can use to configure ext keys.
Parameter
expkey.type_range.custom <y0000000000xx>.cfg
Description
It configures the list for available ext key types list when configuring ext keys.
To assign function types, specify ext key type IDs which start with or without a symbol ”+”. For
example, “+2,15,16,7,4” or “2,15,16,7,4” means only “N/A”, “Forward”, “Line”, “BLF”, “Recall”, “Hold”
types are available when you configure ext keys.
To remove a function type, specify ext key type IDs which start with the symbol “-”. For example, “-14,
5, 2” means to remove “Intercom”, “DND”, “Forward” types from the ext key types list. These ext key
types are not available when you configure ext keys.
Note: Multiple ext key type IDs are separated by commas. N/A type is always kept.
Permitted
Values
Blank or 0 (all valid function types are available);
Dsskey type IDs.
For supported Dsskey types and IDs, refer to Supported Dsskey Types.
Default
Blank
Supported
Devices
T57W, T54W, T53W, T53, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T29G, T27G
Parameter
expansion_module.X.key.Y.type
[1]
<y0000000000xx>.cfg
Description
It configures the feature for a specific ext key.
Permitted
Values
0-N/A
1-Conference
2-Forward
3-Transfer
4-Hold
5-DND
7-Recall
8-SMS
9-Direct Pickup
10-Call Park
11-DTMF
12-Voice Mail
13-Speed Dial
14-Intercom
15-Line
16-BLF
17-URL
18-Group Listening
20-Private Hold
22-XML Group
23-Group Pickup
24-Multicast Paging
(Paging)
25-Record
27-XML Browser
34-Hot Desking
35-URL Record
37-Switch (only applicable to ext key 1 for
T29G/T27G phones)
38-LDAP (only appears when “ldap.enable=1”)
39-BLF List
40-Prefix
41-Zero Touch
42-ACD
45-Local Group
50-Phone Lock
56-Retrieve Park
61-Directory
66-Paging List
73-Custom Key (only available when “fea-
tures.enhanced_dss_keys.enable=1”)
77-Mobile Account (only available to
T57W/T54W/T53W/T53/T48U/T46U/T43U phones
when the Bluetooth-enabled mobile phone is con-
nected)
104-Google Contacts (only appear when “google_
contact_server.enable = 1”)
To Next Page
Loading...
Need help?
General
