EasyManuals Logo
Home>Yealink>IP Phone>SIP-T30P

Yealink SIP-T30P Administrator's Guide

Yealink SIP-T30P
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #243 background imageLoading...
Page #243 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
239
Default
Blank
Parameter
custom_softkey_call_in.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the CallIn state.
Note: It works only if “phone_setting.custom_softkey_enable is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_connecting.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Connecting state.
Note: It works only if “phone_setting.custom_softkey_enable is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_dialing.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Dialing state.
Note: It works only if “phone_setting.custom_softkey_enable is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Supported
Devices
All phones except T57W, T48U, T48S and T48G
Parameter
custom_softkey_ring_back.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the RingBack state.
Note: It works only if “phone_setting.custom_softkey_enable is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_talking.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Talking state.
Note: It works only if “phone_setting.custom_softkey_enable is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Example: Setting the Soft Keys Layout in Talking State
The following example shows the configuration for setting the soft key layout in the talking state.
Customize a softkey layout file “Talking.xml” and place this file to the provisioning server “http://192.168.10.25”.
Example
phone_setting.custom_softkey_enable = 1
custom_softkey_talking.url = http://192.168.10.25/Talking.xml

Table of Contents

Other manuals for Yealink SIP-T30P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T30P and is the answer not in the manual?

Yealink SIP-T30P Specifications

General IconGeneral
BrandYealink
ModelSIP-T30P
CategoryIP Phone
LanguageEnglish

Related product manuals