Phone Customization
202
desired picture as the idle screen/Dsskey screen or EXP wallpaper. After you set a picture in USB flash drive as the
idle screen/Dsskey screen or EXP wallpaper, the picture is added to the Wallpaper list.
Note: Yealink phones support USB flash drive in FAT32 or NTFS format.
Related Topic
Custom Wallpaper Picture Limit
Example: Setting a Custom Picture as Wallpaper
The following example shows the configuration for uploading custom picture named “wallpaper.jpg” and set it as
idle screen wallpaper. The custom picture is placed on the provisioning server “192.168.10.25”.
Example
wallpaper_upload.url = http://192.168.10.25/wallpaper.jpg
phone_setting.backgrounds = wallpaper.jpg
After provisioning, the phone idle screen wallpaper changes to custom picture “wallpaper.jpg”.
Transparency
The T57W/T54W/T48U/T48S/T48G/T33P/T33G phones display line keys and status bar transparently. If you use a
custom picture with a color or complex background, it may affect the user’s experience. You can choose the appro-
priate transparency for DSS key labels and status bar on the idle screen as required.
The following show line keys and status bar transparency set on T48S phones:
Topic
Transparency Configuration
Transparency Configuration
The following table lists the parameter you can use to adjust transparency.
Parameter
phone_setting.idle_dsskey_and_title.transparency <y0000000000xx>.cfg
Description
It configures the transparency of the DSS key labels and status bar on the idle screen for the IP phone.
Note: It is also applicable when the DSS key list is unfolded on the T57W/T48U/T48S/T48G phones.
Permitted
Values
0%, the DSS key labels and status bar are non-transparent.
20%, 40%, 60%, 80% or 100%
Default
100%
Supported
Devices
T57W, T54W, T48U, T48S, T48G, T33P, T33G
To Next Page
Loading...
Need help?
General
