Yealink SIP-T30P Administrator's Guide

Phone Customization
216
Default
1
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U
Parameter
expansion_module.page_tip.blf_call_in.led <y0000000000xx>.cfg
Description
It configures the page switch key LED status on the EXP50/EXP43 expansion module when BLF mon-
itored user receives an incoming call on the non-current pages.
This value uses the same macro action string syntax as an Enhanced DSS key.
If it is left blank, the default value takes effect.
Example:
expansion_module.page_tip.blf_call_in.led = $LEDr300o300$
It means an infinite loop for page switch key LED status: glow red for 300ms and then be in the off
state for 300ms.
Note: It works only if “expansion_module.page_tip.blf_call_in.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
$LEDr300o300$
Supported
Devices
T57W, T54W, T53W, T53, T48U, T46U, T43U
Time and Date
Yealink phones maintain a local clock. You can choose to get the time and date from SNTP (Simple Network Time
Protocol) time server to have the most accurate time and set DST (Daylight Saving Time) to make better use of day-
light and to conserve energy, or you can set the time and date manually. The time and date can be displayed in sev-
eral formats on the idle screen.
Topics
Time Zone
NTP Settings
DST Settings
Time and Date Manually Configuration
Time and Date Format Configuration
Date Customization Rule
Time Zone
The following table lists the values you can use to set the time zone location.
Time Zone Time Zone Name Time Zone Time Zone Name
-12 Eniwetok,Kwajalein +2 Estonia(Tallinn)
-11 Midway Island +2 Finland(Helsinki)
-10 United States-Hawaii-Aleutian +2 Gaza Strip(Gaza)
-10 United States-Alaska-Aleutian +2 Greece(Athens)
-9:30 French Polynesia +2 Harare
-9 United States-Alaska Time +2 Israel(Tel Aviv)

Yealink SIP-T30P Specifications

General

Brand	Yealink
Model	SIP-T30P
Category	IP Phone
Language	English