Yealink SIP-T30P Administrator's Guide

Network Configurations
23
Network Configurations
You can make custom network configurations.
Topics
IPv4 and IPv6 Wired Network Settings
DHCP Option for IPv4
DHCP Option for IPv6
VLAN
Wi-Fi
Real-Time Transport Protocol (RTP) Ports
Network Address Translation (NAT)
Internet Port and PC Port
VPN
Quality of Service (QoS)
802.1x Authentication
TR-069 Device Management
IPv4 and IPv6 Wired Network Settings
You can configure the devices to operate in IPv4, IPv6, or dual-stack (IPv4/IPv6) mode.
After establishing wired network connectivity, the devices obtain the IPv4 or IPv6 network settings from a Dynamic
Host Configuration Protocol (DHCPv4 or DHCPv6) server. We recommend using DHCP where possible to elim-
inate repetitive manual data entry.
You can also configure IPv4 or IPv6 network settings manually.
Note: Yealink devices comply with the DHCPv4 specifications documented in RFC 2131, and DHCPv6 specifications doc-
umented in RFC 3315.
Topics
Wired Network IP Addressing Mode Configuration
IPv4 Wired Network Configuration
IPv6 Wired Network Configuration
Wired Network IP Addressing Mode Configuration
The following table lists the parameters you can use to configure IP addressing mode for the wired network.
Parameter
static.network.ip_address_mode
[1]
<y0000000000xx>.cfg
Description
It configures the IP addressing mode for the wired network.
Permitted
Values
0-IPv4
1-IPv6
2-IPv4 & IPv6
Default
0
Web UI
Network > Basic > Internet Port > Mode (IPv4/IPv6)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > WAN Port > IP Mode
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IP Mode

Yealink SIP-T30P Specifications

General

Brand	Yealink
Model	SIP-T30P
Category	IP Phone
Language	English