User Guide for the SIP-T46G IP Phone
108
phone will dial out “1234567” instead.
Note
To edit a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the desired replace rule by checking the checkbox.
3. Edit the values in the Prefix and Replace fields.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Edit to accept the change.
To delete one or more replace rules via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the one or more replace rules by checking the checkbox(es).
3. Click Del to delete the replace rule(s).
Note
Dial Now
You can configure one or more dial now rules (up to 100) on your phone. When the dialed
number matches the dial now string, the number will be dialed out automatically. For example, a
dial now rule is configured as "1xxx", any entered four-digit string beginning with 1 will then be
dialed out automatically on the phone.
To add a dial now rule via web user interface:
1. Click on Settings->Dial Plan->Dial Now.
2. Enter the desired value (e.g., 1xxx) in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
The valid values for the Account field can be one or more digits among 1-16. Every two digits
must be separated by a comma. For example, when you enter the value “1, 2” in the Account
field, this replace rule will apply to account 1 and account 2.
If you leave the Account field blank or enter 0, the replace rule will apply to all accounts.
Replace rule is configurable via web user interface only.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
