User Guide for the SIP-T46G IP Phone
34
1) Select Move Up or Move Down from the prompt list to improve or lower the
priority of the wireless network that the IP phone automatically connects to.
- To delete the saved wireless network profile(s):
1) Select Delete or Delete All from the prompt list.
If you delete your wireless network profile from your phone, you need to
manually connect to it next time.
Disconnecting the Wireless Network Connection
To disconnect wireless network via phone user interface:
1. Press Menu->Basic->Wi-Fi->X Available Network(s) (X represents the number of
available networks)
2. Select the connected wireless network, and then press the Disconnect soft key.
The wireless network is disconnected. You can press the Connect soft key to connect
again.
Deactivating the Wi-Fi Mode
To deactivate the Wi-Fi mode via phone user interface:
1. Press Menu->Basic->Wi-Fi.
2. Press or , or the Switch soft key to select Off from the Wi-Fi field.
3. Press the Save soft key to accept the change.
The Wi-Fi icon disappears from the status bar.
Wi-Fi is configurable via web user interface at the path Network->Wi-Fi.
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. The SIP-T46G IP phone supports up to 16
To Next Page
Loading...
Need help?
General
Weight and Dimensions
