Basic Call Features
145
If on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate call waiting on the server. It is not available on all servers.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Call waiting is configurable via web user interface at the path Features->General Information.
Note
Conference
You can create a conference with other two parties using the phone’s local conference. You can
create a conference between an active call and a call on hold by pressing the Conference soft
key. The SIP-T46G also supports network conference.
Note
Local Conference
The SIP-T46G IP phone supports up to 3 parties (including yourself) in a conference call. This is
the default method of conference called Local Conference.
Note
To set up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, press the Conference soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and then press , , or the Send soft key.
Network conference is not available on all servers. For more information, contact your system
administrator.
To set up a local conference call, make sure local conference feature is enabled. For more
information, contact your system administrator.
If on code or off code is not configured, the call waiting may not take effect. It depends on your
server. Contact your serve administrator r for more information.