User Guide for the VC800 Video Conferencing System
98
To view multi-way MCU status via the CP960 conference phone:
1. Tap ->License.
Multi-way MCU status can be viewed via web user interface at the path Status->License.
Note
Initiating a Conference
With a multi-way MCU, You can initiate a conference by dialing a group or inviting participants
during a call.
You can initiate a conference via the remote control, CP960 conference phone or web user
interface.
Initiating a Conference by Dialing a Group
To dial a group via the remote control:
1. Select (Dial menu) or press to enter the pre-dialing screen.
2. Press to return to the menu.
3. Press or to scroll to Group Dial and then press to enter submenu.
4. Select the desired contacts you want to call.
You can select up to 24 contacts.
Upgrading the system or performing a factory reset will not affect the imported multi-way MCU.
If the system has been imported a trial version of the multi-way MCU and the MCU has not
expired, and you import a permanent version to the system, the permanent version will overwrite
the trial version.
If the system has been imported a permanent version of the multi-way MCU, and you import a
trial version to the system, the permanent version will not be overwritten.
To Next Page
Loading...
Need help?
General
