-43-
(16) C-mount port
The port to connect C-mount adapter of your microscope. Dust cover (D8953GV) is
fixed at factory.
(17) Dust cover for 2
nd
camera port will be provided with M1 and A1 models.
(18) Space for excitation filter block.
The same excitation block with that of CSU10 can be inserted here.
(19) Identification label
MS code, rated supply voltage, product number and serial number
(20) Cover for the excitation light path
This cover may be removed when you install the excitation filter unit.
If you open this cover, Class 3B laser beam could be emitted. Warning sign to class 3B
laser radiation to ask avoiding exposure to the beam is attached. Please ask for the
advice from your support service when you wish to install or exchange the excitation
filter unit..
Please refer to Chapter 1 for the explanation of warning labels.
.
(17)
(20)
(19)
To Next Page
Loading...
General