3 - 30 CS4070 Scanner Product Reference Guide
Hand-Held Decode Aiming Pattern
Parameter # 306
SSI # F0h 32h
Select Enable Hand-Held Decode Aiming Pattern to project the aiming dot during bar code capture, or
Disable Hand-Held
Decode Aiming Pattern to turn the aiming dot off.
NOTE With Picklist Mode on page 3-40 enabled, the decode aiming dot flashes even when the Hand-Held
Decode Aiming Pattern is disabled.
*Enable Hand-Held Decode Aiming Pattern
(2)
Disable Hand-Held Decode Aiming Pattern
(0)
To Next Page
Loading...
Need help?
General
