User Preferences 3 - 51
Out of Range Electric Fence
Out of Range Electric Fence Alarm
Parameter # 1426
SSI # F8h 05h 92h
This feature prevents scanners from going missing from a fixed location. Enable this to create an alarm that
generates a constant beep tone, vibration feedback, and rapidly flashes the LED between red and amber if the
scanner moves out of range of a Bluetooth host system for a programmable amount of time.
NOTE To turn the alarm off, press and hold the minus button for greater than three seconds.
NOTE This alarm is automatically disabled if Batch Mode on page 3-44 is set to Standard Batch Mode (i.e., after
scanning the Enter Batch Mode bar code), Out of Range Batch Mode, or Batch Mode Only.
Enable Out of Range Electric Fence Alarm
(1)
*Disable Out of Range Electric Fence Alarm
(0)
To Next Page
Loading...
Need help?
General
