User Preferences 3 - 55
Continuous Bar Code Read
Parameter # 649
SSI # F1h 89h
Enable this to report every bar code while the scan (+) button is held.
Unique Bar Code Reporting
Parameter # 723
SSI # F1h D3h
Enable this to report only unique bar codes while the scan (+) button is held. This option only applies when
Continuous Bar Code Read is enabled.
NOTE Zebra strongly recommends enabling Picklist Mode on page 3-40 with this feature. Disabling Picklist
Mode can cause accidental decodes when more than one bar code is in the scanner's field of view.
NOTE Enabling this feature disables deleting batch data from the Barcode.txt batch file by pressing the delete
(minus) key. To clear data in Continuous Bar Code Read mode, see Clear Data on page 3-11.
*Disable Continuous Bar Code Read
(0)
Enable Continuous Bar Code Read
(1)
Disable Continuous Bar Code Read Uniqueness
(0)
*Enable Continuous Bar Code Read Uniqueness
(1)
To Next Page
Loading...
Need help?
General
