Zebra S4M User Manual

Introduction
Control Panel
18
13290L-004 Rev. A S4M User Guide 6/15/09
Control Panel LCD
The control panel LCD functions differently in different printer modes.
•In Operating mode, the LCD displays the printer’s status, sometimes in conjunction with
a control panel light (see Control Panel Lights on page 20). When the printer is receiving
data, the control panel shows the word
DATA and cycles through a series of dots and
spaces.
•In Pause mode, the printer stops printing temporarily.
•In Setup mode, you can use the control panel LCD to view or modify printer parameters
(see Control Panel Parameters on page 72).
•In Error mode, the LCD may display an alert or error message (see LCD Error Messages
on page 101).
Control Panel Buttons
The printer has six basic control buttons on the control panel. Some of these buttons also
function as navigational keys when the printer is in Setup mode. The current function of a
particular button is determined by which light is illuminated next to it (Figure 4).
Figure 4 • Example of Active Control Panel Buttons
Table 1 describes the function of each button. The
MENU, PAUSE, and FEED buttons are
active when the printer is in normal operating mode.
1
FEED active
2
Right arrow active
FEED FEED
1
2

Zebra S4M Specifications

General

Flash memory	4 MB
Internal memory	8 MB
Dimensions (WxDxH)	272 x 477 x 295 mm
Media types supported	continuous, die-cut, tag, black mark
Media thickness	0.076 - 0.15 mm
RS-232 ports	1
Standard interfaces	USB 2.0
Storage temperature (T-T)	5 - 40 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Weight	12400 g