Zebra S4M User Manual

Introduction
Control Panel
20
13290L-004 Rev. A S4M User Guide 6/15/09
Control Panel Lights
Table 2 describes lights on the control panel that indicate different printer conditions.
Table 2 • Control Panel Lights
Light
Appearance
Function/Description
POWER Indicates that the printer is on.
ALERT In an error or alert situation, the ALERT light flashes.
PAUSE (part of the
PAUSE button)
Flashes when the printer is in Pause mode unless the printer enters
Setup mode and the down arrow becomes active.
FEED (part of the
FEED button)
On during normal printer operation, indicating that the printer can
feed a blank label.
CANCEL (part of
the
CANCEL button)
On when canceling a label format is a valid option.
POW
ER
A
LERT
PAUSE
FEED
CANCEL

Zebra S4M Specifications

General

Flash memory	4 MB
Internal memory	8 MB
Dimensions (WxDxH)	272 x 477 x 295 mm
Media types supported	continuous, die-cut, tag, black mark
Media thickness	0.076 - 0.15 mm
RS-232 ports	1
Standard interfaces	USB 2.0
Storage temperature (T-T)	5 - 40 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %

Weight and Dimensions

Weight	12400 g