Accessories
145
2. Lift inert out of cup.
3. Align the cable cup with the bottom of the device.
4. Press the device into the cable cup until it securely in place.
USB Communication
To connect the device to a host computer:
1. Connect the Rugged Charge/USB Cable to the device.
2. Connect the USB connector of the cable to a host computer.
Charging the Device
To charge the device using the Rugged Charge/USB Cable:
1. Connect the Rugged Charge/USB Cable to the device.
2. Connect the USB connector of the power supply.
MN-003834-01ENa_tc52-android-10-ug-en.book Page 145
To Next Page
Loading...
Need help?
General
