Application Deployment
170
Downloading the System Update Package
1. Go to the Zebra Support & Downloads web site, www.zebra.com/support.
2. Download the appropriate System Update package to a host computer.
Performing a System Update Using microSD Card
It is strongly recommended that prior to use, you must format the microSD card on the device.
1. Copy the System Update zip file to the root of the microSD card.
• Copy the zip file to a microSD card using a host computer (see USB Communication for more
information), and then installing the microSD card into the device (see Replacing the microSD Card
for more information).
• Connect the device with a microSD card already installed to the host computer, and copy zip file to
the microSD card. See USB Communication for more information. Disconnect the device from the
host computer.
2. Press and hold the Power button until the menu appears.
3. Touch Restart.
4. Touch OK. The device resets.
5. Press and hold the PTT button until the device vibrates. The System Recovery screen appears.
6. Press the Volume Up and Volume Down buttons to navigate to apply from sdcard.
7. Press the Power button.
8. Press the Volume Up and Volume Down buttons to navigate to Full OTA Package or Diff OTA
Package.
9. Press the Power button.
10. Press the Volume Up and Volume Down buttons to navigate to the System Update file.
11. Press the Power button. The System Update installs and then the device returns to the Recovery
screen.
12. Press the Power button to reboot the device.
Performing a System Update Using ADB
1. Connect the device to a host computer using the Rugged Charge/USB cable or by inserting the device
into the 1-Slot USB/Charge Only Cradle.
2. Go to Settings.
3. Touch System > Advanced > Developer options.
4. Slide the switch to the ON position.
5. Touch USB Debugging. A check appears in the check box. The Allow USB debugging? dialog box
appears.
6. Touch OK.
MN-003834-01ENa_tc52-android-10-ug-en.book Page 170
To Next Page
Loading...
Need help?
General
