Getting Started
18
Setting Up the Device
To start using the device for the first time:
1. Install a micro secure digital (SD) card (optional).
2. Install hand strap (optional).
3. Install the battery.
4. Charge the device.
5. Power on the device.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator
is properly grounded.
1. Lift the access door.
2. Slide the microSD card holder to the unlock position.
MN-003834-01ENa_tc52-android-10-ug-en.book Page 18
To Next Page
Loading...
Need help?
General
