Zte ZXR10 2900E Series User Manual

ZXR102900ESeriesCommandReference
4.4.4setmirrorsessiondeletedest-port
Purpose
Thiscommanddeletesingress/egressmirroringdestinationportsinaccordancewitha
sessionanddisablestheRSPANfunctionofthemirroringports.
CommandMode
Globalcongurationmode
Syntax
setmirrorsession<1-3>deletedest-port<1-28>{ingress|egress|rspan}
ParameterDescription
ParameterDescription
<1-3>Mirrorfunctionsessionnumber.Threesessionscanbesupported.
<1-28>Portnumber.Portrangesvarywithdifferentdevicemodels.
ingress
Ingressmirroringport.Inasession,theegressmirroringportand
ingressmirroringportcanbedifferentmirroringports.
egress
Egressmirroringport.Inasession,theegressmirroringportand
ingressmirroringportcanbedifferentmirroringports.
rspan
DisablestheRSPANfunctionforthemirroringports.Iftheingress
mirroringportandegressmirroringportaredifferentmirroring
ports,theRSPANfunctioncanbedisabledseparately.
Example
Thefollowingexampledeletestheingressmirroringport1:
zte(cfg)#setmirrorsession1deletedest-port1ingress
4.4.5setmirrorrspan-tagvlan-idpriority
Purpose
ThiscommandsetstheRSPANtagformat,includingVLAN-IDandpriority.
CommandMode
Globalcongurationmode
Syntax
setmirrorrspan-tagvlan-id<1-4094>priority<0-7>{ingress|egress}
4-74
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2900E Series Specifications

General

Series	ZXR10 2900E
Category	Switch
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	10/100/1000Base-T
Uplink Ports	SFP
Power Supply	AC or DC
Layer Support	Layer 2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Jumbo Frame	9K
VLAN Support	Yes