Zte ZXR10 2900E Series User Manual

ZXR102900ESeriesCommandReference
ParameterDescription
ParameterDescription
<1000-25000>Waitingtime,intheunitofmilliseconds.
Guidelines
Whentheswitchreceivesquerymessages,itwaitsforaperiodandthensendsreport
messages,whichavoidsinstantattackstotherouterduetothecentralizedreplies.
Defaults
Thewaitingtimeis10000milliseconds.
Example
Thefollowingexamplesetsthewaitingtimethattheswitchsendsreportmessagesto15
seconds:
zte(cfg)#setmldsnoopingquery-response-interval15000
4.35.10setmldsnplast-member-query
Purpose
Thiscommandsetsthewaitingtimeforrepliesaftertheswitchsendsquerymessages
whenthelastmemberleaves.
CommandMode
Globalcongurationmode
Syntax
setmldsnoopinglast-member-query<1-25>
ParameterDescription
ParameterDescription
<1-25>Waitingtime(seconds)forreplies
Guidelines
Ifnoresponsewhentimeisout,deletethelastmember.
Default
Thewaitingtimeforrepliesisonesecond.
4-528
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2900E Series Specifications

General

Series	ZXR10 2900E
Category	Switch
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	10/100/1000Base-T
Uplink Ports	SFP
Power Supply	AC or DC
Layer Support	Layer 2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Jumbo Frame	9K
VLAN Support	Yes