Zte ZXR10 2900E Series User Manual

Chapter4ServiceConguration
Default
Thevlanjumpfunctionisdisabled.
Example
Thefollowingexamplesetsthattheusersofports1,3,5and7canaccessVLAN1000
afterauthenticationispassed:
zte(cfg)#setvlan1000enable
zte(cfg)#setport1,3,5,6vlanjumpenabledefaultauthvlan1000
4.20.2dot1xre-authenticateenable/disable
Purpose
Thiscommandenablesordisablesthere-authenticationfunction.
CommandMode
NAScongurationmode
Syntax
dot1xre-authenticate{enable|disable}
ParameterDescription
ParameterDescription
enableEnablesthere-authenticationfunction.
disableDisablesthere-authenticationfunction.
Default
There-authenticationfunctionisdisabled.
Example
Thefollowingexampleenablesthere-authenticationfunction:
zte(cfg-nas)#dot1xre-authenticateenable
4.20.3dot1xre-authenticateperiod
Purpose
Thiscommandsetstheintervalforre-authentication.
4-379
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2900E Series Specifications

General

Series	ZXR10 2900E
Category	Switch
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	10/100/1000Base-T
Uplink Ports	SFP
Power Supply	AC or DC
Layer Support	Layer 2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Jumbo Frame	9K
VLAN Support	Yes