Zte ZXR10 2900E Series User Manual

ZXR102900ESeriesCommandReference
ParameterDescription
<source-ipaddr>
IPaddressofthesourcenetworkorhosttransmittingpackets.Itis
a32-bitIPaddressexpressedindotteddecimalnotation.
<sip-mask>
Sourcemaskusedforsources.Itisa32-bitIPaddressexpressed
indotteddecimalnotation.
any(rst)
Theanykeywordisusedastheabbreviationofthesource0.0.0.0
andthesourcemask0.0.0.0.
<destination-ipaddr>
Destinationnetworkorhostofthetransmittedpacket.Itisa32-bit
IPaddressexpressedindotteddecimalnotation.
<dip-mask>
Destinationmaskusedfordestination.Itisa32-bitIPaddress
expressedindotteddecimalnotation.
any(second)
Theanykeywordisusedastheabbreviationofthedestination
0.0.0.0andthedestinationmask0.0.0.0
dscp<0-63>
ThisruleisonlyvalidformessageswiththespeciedDSCP
value.Ignorethisruleforothermessages.Therangeofthe
DifferentiatedServicesCodePoint(DSCP)valueis0to63.
fragment
Thisruleisonlyvalidforfragmentmessages.Fornon-fragment
messages,thisruleisignored.
Guidelines
TheIP-protocolrulecanmatchIPv4protocoleldswithspeciedsourceIPaddresses,
anysourceIPaddress,specieddestinationIPaddresses,anydestinationIPaddress,
DSCPelds,orIPfragmentelds.
4.13.13ingress-aclextendruletype-icmp
Purpose
ThiscommandsetstherulethattheextendedingressACLisusedtomatchICMP
messages.
CommandMode
ExtendedingressACLcongurationmode
Syntax
rule<1-500>{permit|deny}icmp{<source-ipaddr><sip-mask>|any}{<destination-ipaddr><di
p-mask>|any}[icmp-type<0-254><icmp-code>][dscp<0-63>][fragment]
4-220
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2900E Series Specifications

General

Series	ZXR10 2900E
Category	Switch
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	10/100/1000Base-T
Uplink Ports	SFP
Power Supply	AC or DC
Layer Support	Layer 2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Jumbo Frame	9K
VLAN Support	Yes