Zte ZXR10 2900E Series User Manual

ZXR102900ESeriesCommandReference
Default
ThedefaultUDPportis1812.
Example
ThefollowingexampleaddstheauthenticationserverwiththeIPaddressof10.40.89.78
totheISPdomainnamedastest.Thedefaultportnumberisused.
zte(cfg-nas)#radiusisptestaddauthentication10.40.89.78
4.20.34radiusispclient
Purpose
ThiscommandsetstheRADIUSclientaddress.
CommandMode
NAScongurationmode
Syntax
radiusisp<ispname>client<A.B.C.D>
ParameterDescription
ParameterDescription
<ispname>ISPname
<A.B.C.D>ClientIPaddress
Guidelines
AsaRADIUSclient,theswitchcommunicateswiththeserver.Ingeneral,theRADIUS
clientaddressissettoalayer–3portaddressoftheswitch.
Example
ThefollowingexamplesetstheRADIUSclientaddressto10.40.89.100:
zte(cfg-nas)#radiusisptestclient10.40.89.100
4.20.35radiusispsharedsecret
Purpose
Thiscommandsetsthesharedpassword(publickey)ofthespeciedISPdomain.
4-398
SJ-20130731155059-003|2013-11-27(R1.0)ZTEProprietaryandCondential

Zte ZXR10 2900E Series Specifications

General

Series	ZXR10 2900E
Category	Switch
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Ports	10/100/1000Base-T
Uplink Ports	SFP
Power Supply	AC or DC
Layer Support	Layer 2
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Jumbo Frame	9K
VLAN Support	Yes