1.5.2.8.4 Connection to the CS31 bus
Data Value
Connections X1/B2, X1/B1
CS31 bus type 04 (digital input/output)
Termination resistor Not available (must be provided externally if
needed)
1.5.2.8.5 Mechanical data
Data Value
Width x height x depth Replacement device: 120 x 140 x approx. 80
mm
Existing device: 120 x 140 x 85 mm
Weight Replacement device: 351 g (incl. terminals)
Existing device: 450 g
Dimensions for mounting See operating and assembly instructions of
the replacement device (3ADR020151M0401)
1.5.2.8.6 Assembly / Disassembly
The dimensions for the assembly holes are the same for the replacement
device and the existing device.
To assemble or disassemble the replacement device, grab the device at the housing and not
directly at the S500 module.
CAUTION!
System damage caused by voltage!
The exchange of a replacement device under voltage can cause permanent
system damage (destruction).
1.5.2.8.7 Ordering data
Order No. Scope of delivery
1SAP 800 500 R0010 Digital input/output module 07DC92-AD
1x 5-pole terminal block (5.08 mm grid space)
1x 3-pole terminal block (5.08 mm grid space)
4x 10-pole terminal blocks (3.81 mm grid
space)
Replacement devices: I/O modules > Replacement device 07DC92-AD
2018/09/24 3ADR010122, 8, en_US 87
To Next Page
Loading...
Need help?
General
