Safety Instructions
ACS 600 MultiDrive 15
Mechanical Installation
CAUTION! Fastening any device to the cabinet frame for lifting
purposes is forbidden.
CAUTION! Make sure that dust from drilling does not enter the
cabinet when installing. Electrically conductive dust inside the unit may
cause damage or lead to malfunction.
CAUTION! Welding of the cabinet frame is not recommended because
it may damage electronic circuits located in the drive sections.
However, if electric welding is the only way to mount the cabinet
connect the return conductor of the welding equipment low to the
cabinet frame within 0.5 metres of the welding point to reduce the risk
of damage.
To Next Page
Loading...
Need help?
General
