—
ABB MEASUREMENT & ANALYTICS | OPERATING INSTRUCTION
AWT420
Universal 4-wire, dual-input transmitter
Measurement made easy
Introduction
The AWT420 is a universal 4-wire, dual-input
transmitter suitable for the measurement and
control of a wide range of parameters including
pH, ORP, conductivity, turbidity/suspended
solids and dissolved oxygen.
The AWT420 supports both traditional analog and
advanced digital EZLink sensors.
This Operating Instruction provides installation,
operation and maintenance procedures for the
AWT420 transmitter. For information on the
sensors, including installation, commissioning,
operation and maintenance procedures, refer to
the specific sensor manual.
For more information
Further publications for the AWT420 transmitter
are available for free download from:
www.abb.com/measurement
or by scanning this code:
Links and reference numbers for the transmitter
publications are also shown below:
Search for/click on:
Commissioning Instruction
C
HART Communications Supplement
HART-EN
PROFIBUS Communications Supplement
PROFIBUS-EN
Ethernet Communications Supplement
ETHERNET-EN
—
AWT420
Universal 4-wire,
dual-input transmitter
To Next Page
Need help?
General
