ABB AWT420 User Manual

AWT420 | UNIVERSAL 4-WIRE, DUAL-INPUT TRANSMITTER | OI/AWT420-EN REV. B
21
6 Easy Setup
When the transmitter is started up for the first time, or when
Restore defaults is selected from the Configuration/Device
Setup/Initial Setup menu (see page 38), the ‘Easy Setup’
prompt is displayed:
Press the key ( ) to start Easy Setup or press the key ( )
to cancel and exit to the main Operator page.
Press the key (Edit) to change the default value/setting to
the required value/selection. Press the key (Next) to accept
the default or revised value/selection and advance to the next
parameter.
Transmitter parameters that can be configured in this way are:
Language, Instrument Tag, Diagnostics View, Signals View,
Chart View, Alarm View, Analog OP View, Calibration Log,
Alarm Log, Audit Log, Diagnostics Log, Date Format and Date
& Time. On completion of Easy Setup, the display returns to the
Easy Setup start screen:
Press the key (Select) to revise/amend the settings just
made or press the key (Exit) to cancel and exit to the main
Operator page.
All transmitter parameters can be revised/changed at any time
by selecting Enter Configuration from any Operator or View
page menu, followed by Advanced from the Access Level menu.
NOTICE
• If Easy Setup does not detect a key press within 5
minutes, the display changes automatically to the main
Operator page.
• Refer to page 25 for details of menu navigation and
parameter selection/adjustment.
7 Calibration and sensor setup
CAUTION

sensor and transmitter are fully installed and ready for
operation.
NOTICE
• The menu structure, general operation and menu
descriptions are detailed on page 36.
• Refer to page 25 for details of menu navigation and
parameter selection/adjustment.
Ensure all electrical connections have been made correctly and
switch on the power to the transmitter. If the sensor is being
commissioned for the first time, sensor calibration and set-up
is recommended for best results.
Refer to the following pages for calibration and setup
procedures:
• page <?>
• page 57
• page 59
• page 70
• page 81
AWT420
03-09-2019
08:14:45
New TX
Detected
Start Easy
Setup ?
Menu
Easy Setup
Exit Select

ABB AWT420 Specifications

General

Brand	ABB
Model	AWT420
Category	Transmitter
Language	English