ABB MEASUREMENT & ANALYTICS |
OPERATING INSTRUCTION | OI/TTF300- EN REV. I
-mount temperature transmitter
—
ABB Measurement & Analytics
For your local ABB contact, visit:
For more product information, visit:
Temperature transmitter for all
communications protocols.
Redundancy thanks to two inputs.
-EN Rev. I 03.2023
The TTF300 is available with the HART,
PROFIBUS
PA and FOUNDATION Fieldbus
The TTF300 has global approvals for explosion
protection up to Zone
0.
The TTF300 implements various NAMUR
recommendations, including
NE 89 and NE 107.
-relevant applications up to SIL 3
(redundant) are supported in accordance with
IEC
61508.
Additional documentation on
TTF300 is available for
download free of charge at
www.abb.com/
temperature.
Alternatively simply scan this code:
We reserve the right to make technical changes or modify the contents of this
document without prior notice. With regard to purchase orders, the agreed particulars
shall prevail.
ABB does not accept any responsibility whatsoever for potential errors or po
ssible lack
of information in this document.
We reserve all rights in this document and in the subject matter and illustrations
contained therein. Any reproduction, disclosure to third parties or utilization of its
contents
– in whole or in parts – is forbidden without prior written consent of ABB.
© ABB 2023 3KXT221001R4201
To Next Page
Need help?
General
