2 Installation and commissioning
2.5.11. Installation of cooling fan for motors, axes 1-3 (option)
1113HAC022033-001 Revision: K
© Copyright 2004-2011 ABB. All rights reserved.
Adjustments in RobotWare
Action Note
1. Modify the settings in RobotWare to
include the cooling fans.
RobotWare 4.0: modify the settings in
RobInstall. RobotWare 4.063 and older must
be updated with a newer release.
RobotWare 5.0: change the settings in the
Modifying options dialogue, by using the
Modify Controller System Wizard in the
System Builder of RobotStudio. Read more
about modifying the system in Operating
manual - RobotStudio.
Continued
To Next Page
Loading...
Need help?
General
