4 Repair
4.3.4. Replacement of air nipple and hose (Foundry Prime)
2693HAC022033-001 Revision: K
© Copyright 2004-2011 ABB. All rights reserved.
Required equipment
Pos 1H Hose length 570 mm
Pos 1K Hose length 4040 mm
Pos 1L Hose length 150 mm
Pos 1M Hose length 120 mm
Pos 1N Hose length 35 mm
Pos 1P Hose length 1540 mm
Pos 1Q Hose length 940 mm
Pos 1R Hose length 1500 mm
A Pneumatic hose
B Y-plug connector
C T-plug connector
a Balancing cylinder, rear end
b Motor axis 1
c Battery cover
d Motor axis 2
e Length = 805 mm
f Motor axis 6
g Rubber clamp on washer on gear axis 6
h Rubber clamp on tilthouse
j Rubber clamp on wrist cover
k Motor axis 5
m Motor axis 3
n Motor axis 4
o Bulkhead plug connector
Equipment Art. no. Pos. in illustration
Velcro strap 3HAC12625-1 9 (only in illustrations below)
Cable straps 21662055-3 8 (only in illustrations below)
Elbow fitting 3HAC026511-001 6 (only in illustrations below)
Rubber clamp 3HAC026523-001 5
T-plug connector 3HAC026515-001 4
Y-plug connector 3HAC026514-001 3
Bulkhead plug connector 3HAC026513-001 2
Hose 3HAC026526-001 1
Continued
Continues on next page
To Next Page
Loading...
Need help?
General
